![]()
To keep the CPUs loaded I am using the client using the -smp -bigadv flags to keep all cores and threads highly active for hours at a time. Namely a 150w LGA 2011 8 core/ 16 thread Intel Xeon CPU running at 3.1GHz and a Core i7-3930K running at 4.54GHz. On the lower-power platforms, the low and medium fan settings are all one needs (this one can select by simply pressing the circular fan button on the waterblock.) While that was all well and good, I decided to use some hotter processors. With chips such as the Intel Core i7-2600K or Core i7-2700K, i7-3770K the Corsair H80 or H100 may start to make sense because there is a lot of overclocking potential, and therefore heat available. The Intel retail CPU cooler is very sufficient in the Sandy Bridge and Ivy Bridge range. Ivy Bridge versions are going to be 77w or less, further eliminating the need for a high-end cooler. HYPER 212 EVO INSTALL VIDEO SERIESPerformanceįor Intel Xeon E3-1200 series processors, I would suggest that these CPU coolers are all overkill as 80-95w TDP is relatively low. One should take care to remember that adding a second fan does negate some of the value one gets by purchasing such an expensive CPU cooler. Although one fan is included, one can easily add a second fan for better performance. HYPER 212 EVO INSTALL VIDEO PLUSI will note that the Hyper 212 Plus is too large, when installed, to fit in most 4 U server and workstation chassis due to its height. The Hyper 212 Plus does not suffer from this common installation caveat. One aspect that is fairly important with the Hyper 212 Plus is that the heatsink is not deep enough to interfere with installation (when fans are not installed.) Some CPU coolers have heatsinks that overhang their mounting points making installation very difficult using standard screwdrivers. Httpv://The Hyper 212 Plus utilizes four heat pipes and an aluminum fin tower cooler design. Cooler Master has a great YouTube video on installing the Hyper 212 Plus. I use the Hyper 212 Plus and Hyper 212 EVO models quite often on personal systems and around the lab so I can do a complete installation in about three minutes at this point, including thermal paste installation. ![]() The Cooler Master Hyper 212 Plus is a very easy cooler to install. That is why we saw the Hydro Series coolers be so easy to mount. Servers and workstations often come with a chassis that includes all necessary fans. Adding a cooling component to a 120mm fan mount is trivial in the context of consumer cases, while it is not a given that workstation and server chassis may not include appropriate mounting points. This is going to be fairly typical for a LGA 2011 workstation with either and Intel Xeon or Intel Core i7 CPU.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |